This site uses cookies to provide you with a great user experience and to show you relevant ads. If you’re OK with that, just continue. To find out more, please review our privacy policy.

Rear Pulley/ Clutch- GY6/ Peugeot 50cc

#P7024

£35.65
Add to Basket
Description

Complete rear pulley torque control unit with clutch for Chinese GY6, Kymco, Sym 4-stroke & Peugeot 2/4-stroke 50cc scooters.

The rear pulley and clutch units wear due to stresses, the clutch wears as you would expected but also the torque drive guides wear and there is also bearings that can fail. Here we have complete units: Simply remove the transmission cover, clutch nut and clutch bell. Remove & replace torque control unit checking the condition of the belt. Refit clutch bell followed by the nut (thread lock recommended) and refit your transmission cover.

Clutch nut thread: M28x1.00mm (38mm A/F)

Supplied assembled;
clutch, rear pulley(inner & outer), torque spring, nut & bearings.

Fitment
  • Chinese 50cc 4 stroke (GY6- 139QMA/QMB engines)
  • Kymco Agility 50cc 4T
  • Peugeot Jetforce 50cc
  • Peugeot Ludix (all)
  • Peugeot Speedfight 1,2 50cc
  • Peugeot Speedfight 3, 2 stroke (all)
  • Peugeot Speedfight 3, 4-stroke
  • Peugeot Speedfight 4 2-Stroke
  • Peugeot Speedfight 4 50cc 4-Stroke
  • Peugeot Speedfight 50cc (all)
  • Peugeot Trekker 50cc
  • Peugeot Vivacity 3 50 (after '08)
  • Peugeot V-Clic
  • Peugeot Vivacity 50 (up to '08)
  • Peugeot Vivacity 3 ('08 on) 4-stroke
  • Sym 50cc
  • Peugeot Kisbee 50cc (4T)
  • Peugeot Kisbee 50cc (2T)
Spares