This site uses cookies to provide you with a great user experience and to show you relevant ads. If you’re OK with that, just continue. To find out more, please review our privacy policy.
#P6351
Naraku 'black edition' racing PHBG type carburettors.
These carbs feature oil and vacuum feeds for easy fitment on most scooters. The throttle slide is quickly accessed with the screw top, also the main jet is easily accessible through the float drain screw. The outlets either side of the throttle slide are breather pipes (not coolant pipes).
17.5mm: Main Jet 70 (M5), Pilot Jet 60, Needle W16.
19mm: Main Jet 60 (M5), Pilot Jet 60, Needle W16.
21mm: Main Jet 90 (M5), Pilot Jet 45, Needle W16.
Manual cable choke.
Air filter connection: 38mm (32mm without adaptor)
Inlet manifold connection: 25mm
As with all aftermarket carbs; fitment and setup need to be adjusted to suit your bike.
17.5mm on a 50cc kit.
Yes these are suitable for use with oil pumps. Fuel is the biggest brass nipple. The vacuum is the medium brass nipple. The oil is the smallest brass nipple. The two aluminium nipples on the side of the slide are breathers.
These are designed for 2-stroke engines.
Yes but fitting non-standard carbs aren't always straight forward. You may find the throttle cable length will need adjusting to make sure the throttle slide is lifting all the way up and down. The air box will go over the 38mm connection, you may need to warm it. And of course you will need to set up the jetting.
This carb does not use the coolant lines. You can blank them off on the head using these caps.
As soon as we get new stock for Naraku Black Edition Racing Carburettors, we'll send you an email.
