This site uses cookies to provide you with a great user experience and to show you relevant ads. If you’re OK with that, just continue. To find out more, please review our privacy policy.
#P1134
Stage6 CNC drive face with optimized drive face angle
In order to keep costs down, original racing drives are usually cast or (even worse) pressed steel.
When these parts are cooling down after casting, the metal is still molten and the drive face angles can often vary. Due to the fact that racing engines have a very narrow power band, these tolerances have direct consequences on the power output.
In contrast to those standard versions, the Stage6 racing drive is precisely CNC cut out of solid material. All in all, more than twelve different versions were tested to find the optimal angle. The high quality alloys and the special surface coating used in this drive face make cooling fins unnecessary. The reduced mass has of course positive results for the power at the rear wheel.
Stage6 S6-5117500
These are kickstart only, they are normally used with race engines so it's presumed you have removed or are not using the electric start.
